Artiteq Micro Grip Lock 2mm ▪ 20kg - 10pcs

Use with 2mm Suspender ▪ Supports up to 20kg ▪ 10 Years Warranty

Artiteq Micro Grip Lock 2mm

Micro Grip represents the newest generation of hooks. A high-quality plastic reinforced with fibreglass was chosen for this hook, leading to a 70% reduction in the use of materials compared with previous generations of hooks. In addition to the ecological advantages, the hook is extremely lightweight as a result, and very easy to use.

Artiteq Micro Grip Hooks are fitted with the self-locking Auto Grip clamping mechanism. Clamping force increases with higher loads. The hook can be easily vertically adjusted by simply pressing the release button on top and the fastener’s housing together.

Micro Grip Lock

This hook allows to conceal the picture’s cord/ wire to protect the frame against unintentional unhooking. The hook can be unlocked by pressing the lock from both sides and moving it up and simply slide it down to lock it again as shown on the image below.

Micro Grip Lock 2mm can be used in conjunction with all Artiteq cables and rods listed below:

                Twister 2mm Perlon

                Twister 2mm Steel Wire

                Twister 2mm Rod

                Twister Click2Fix 2mm Perlon

                Solid Slider 2mm Perlon

                Solid Slider 2mm Steel Wire

                Slider + Perlon 2mm

                Perlon + Loop 2mm

                Rod White Steel 2mm

The Micro Grip Lock 2mm maximum load capacity of 20kg applies to all listed cable and rod types.

Together with TÜV Nederland, Artiteq has established procedures for the protection of the quality of the Micro Grip Lock 2 mm. The implementation of these procedures is supervised by TÜV Nederland.